Robotic Lawnmower
Indego S+ 500
Robotic Lawnmower
Indego S+ 500
Connected Robotic lawnmower for those smaller gardens up to 500 m²
- Connected capability means you can manage your Indego remotely, using the Bosch Smart Gardening App to optimise your mowing.
- Indego S+ 500 with LogiCut maps the lawn and cuts in efficient parallel lines freeing up your lawn sooner.
- Indego S+ 500 starts every full lawn mowing session with a BorderCut, ensuring a neat finish, right up to the edge of your defined lawn area.
- With MultiArea Indego can save in its memory up to three lawn areas (combined total of 500 m²).
- Indego S 500 knows where narrow passages are in the lawn map; handling corridors that are as small as 75 cm wide (between wires).
Battery voltage
18.0 V
Battery charge time
1,00 h
Battery run time
60
Recommended lawn area, max.
500 m²
Register or log in to MyBosch to benefit from the members-only discount and save up to 5%.
Cuts intelligently with Logicut – always knows where it has been and where it has to go
LogiCut enables Indego to cut efficiently in neat, parallel lines freeing up your lawn sooner. Not only keeping it looking healthy and beautiful, but also, saving more energy in every run and being kinder to the battery. LogiCut defines a different mowing direction for each mowing session in order to avoid leaving permanent tracks on your lawn. With LogiCut, Indego is intelligent. It knows where it has been and where it has to go. The Indego S+ 500 with "SmartMowing" creates a mowing schedule based on your lawn size, weather data and personal preferences meaning manual programming is no longer necessary. Indego can mow up to 3 lawn areas if their combined size is no greater than 500 m².
Indego S+ 500
- Docking station
- Docking station screws with hex key (F 016 800 468)
- 1 x wire connector
- Perimeter wire, 150 m
- 200 x fixing peg
Manufacturer:
Robert Bosch Power Tools GmbH
Max-Lang-Strasse 40-46
70771 Leinfelden-Echterdingen
www.bosch-pt.com
kontakt@bosch.de
+49 (0) 711 400 40990
For warnings and safety instructions, please refer to the operating instructions. The operating instructions can be downloaded here: