Get the right firmware for your product
Here you can download the latest firmware for your product.
Please download the appropriate and corresponding file for your product from the list below.
For connected models you can download the latest firmware straight onto your mower via the Bosch Smart Gardening app.
Indego
Bare tool Number*: 3600HB0004
Part Number**: 06008B0003 / 06008B0033 / 06008B0073
Firmware Version: 7.14.30036 | Release Date: 01.05.2022 | Status: Stable
Release Notes:
- Optimisation of the battery management during mowing in ‘MaintenanceMode’
- Minor improvements of messages given with some error codes
- Minor fixes of incorrect messages appearing on the mower display
NOTE: The features ‘MaintenanceMode‘ is automatically controlled by the Indego and cannot be selected via the menu.
*Bare tool number located on back of product
**Part Number Located on product box
Bare tool Number*: 3600HB0000
Part Number**: 06008B0000 / 06008B0070 / 06008B0030
Firmware Version: 7.14.30036 | Release Date: 01.05.2022 | Status: Stable
Release Notes:
- Optimisation of the battery management during mowing in ‘MaintenanceMode’
- Minor improvements of messages given with some error codes
- Minor fixes of incorrect messages appearing on the mower display
NOTE: The features ‘MaintenanceMode‘ is automatically controlled by the Indego and cannot be selected via the menu.
-
Fix for loss of the BorderCut of Indego from the production years 2017/2018 after updating to 7.11.25239.01251
Important! If your Indego has lost its BorderCut, to restore it, the Indego must be reset to factory settings after the update. The incorrectly saved internal setting is only corrected by resetting to the factory settings!
*Bare tool number located on back of product
**Part Number Located on product box
Bare tool Number*: 3600HB0001
Part Number**: 06008B0001 / 06008B00B0 / 06008B0071 / 06008B0031
Firmware Version: 7.14.30036 | Release Date: 01.05.2022 | Status: Stable
Release Notes:
- Optimisation of the battery management during mowing in ‘MaintenanceMode’
- Minor improvements of messages given with some error codes
- Minor fixes of incorrect messages appearing on the mower display
NOTE: The features ‘MaintenanceMode‘ is automatically controlled by the Indego and cannot be selected via the menu.
-
Fix for loss of the BorderCut of Indego from the production years 2017/2018 after updating to 7.11.25239.01251
Important! If your Indego has lost its BorderCut, to restore it, the Indego must be reset to factory settings after the update. The incorrectly saved internal setting is only corrected by resetting to the factory settings!
*Bare tool number located on back of product
**Part Number Located on product box
Bare tool Number*: 3600HB0202
Part Number**: 06008BD0202 / 06008BD0232 / 0600BD0272
Firmware Version: 8.5.30036 | Release Date: 06/06/2022 | Status: Stable
Release Notes:
- Some enhancements of the obstacle detection sensitivity setting.
This addresses the technical differences of our Indego S/S+ 500 and M/M+ 700 models compared to our Indego XS 300 and Indego 350/400 models. - Improvements of how the mower detects the perimeter wire signal. This can improve the performance and navigation of the mower in some scenarios in bigger lawn areas.
- Small improvements of MaintenanceMode to optimise the battery management in this mode.
- Minor improvements of messages given with some error codes.
- Minor fixes of incorrect messages appearing on the mower display.
*Bare tool number located on back of product
**Part Number Located on product box
Bare tool Number*: 3600HB0203
Part Number**: 06008BD0203 / 06008BD0233 / 0600BD0273
Firmware Version: 8.5.30036 | Release Date: 06/06/2022 | Status: Stable
Release Notes:
- Some enhancements of the obstacle detection sensitivity setting.
This addresses the technical differences of our Indego S/S+ 500 and M/M+ 700 models compared to our Indego XS 300 and Indego 350/400 models. - Improvements of how the mower detects the perimeter wire signal. This can improve the performance and navigation of the mower in some scenarios in bigger lawn areas.
- Small improvements of MaintenanceMode to optimise the battery management in this mode.
- Minor improvements of messages given with some error codes.
- Minor fixes of incorrect messages appearing on the mower display.
*Bare tool number located on back of product
**Part Number Located on product box