A zigzag chest of drawers: paint it yourself in just 3 steps
- Cost50-100 £
- Duration1-3 h
Could you see yourself decorating your entire home in geometric patterns? Then we’ve got an easy project for you: give a chest of drawers a makeover with zigzag stripes, in just three steps. So, grab your masking tape – and let’s go!
- paint roller with tray
- ladder or chair
- protective sheet
- meter rule
- adhesive tape
- chest of drawers
- 2-in-1 paint/primer in the colour of your choice, e.g. black, around 200 ml
Measure your stripes and mark up the pattern on your drawers
You need: Cross Line Laser, meter rule, ladder or chair
To ensure the zigzag pattern on your drawers is clean and even, project the lines on to the drawers using a cross-line laser positioned 10 cm away. Place the device on a ladder or stool, depending on how high the line needs to be. Of course, if your laser came with a tripod, you can also use that. If you have the PLL 2 set, adjust it to 45° (you’ll have to adjust other cross-line lasers manually). Make sure that the laser line runs horizontally – i.e. that the cross-line laser is positioned exactly at the same height as the laser point. Otherwise, 45° may be incorrectly displayed. Transfer the pattern on to your chest of drawers using a ruler and pencil.
TO SAND OR NOT TO SAND?
Stick masking tape around your pattern
You need: adhesive tape
As with our grey-on-grey wall decoration, you first need to stick masking tape around the outline of your pattern. Make sure you closely follow the lines you’ve already marked in pencil, and press down firmly on the tape to prevent any paint from running beneath it.
Paint your zigzag pattern
You need: paint roller with tray, 2-in-1 paint/primer in the colour of your choice, e.g. black, around 200 ml
Now it’s time to get painting. Pour some of the paint into a paint tray, dip the roller in it and then cast off any excess paint before painting in between the tape on the drawers. Let the paint dry and then apply a second coat, if needed. To achieve nice, clean lines, try to paint over the edges of the masking tape slightly (see photo). If you're leaving the drawers in the chest whilst you paint them, you should cover the drawers beneath or tape them up. You can also remove the drawers to paint them – in which case, you should put down some protective floor covering first. Once you’ve finished painting and the paint is completely dry, carefully remove the tape. And viola – you’ve painted an entire chest of drawers in just three steps!