Cut Control‌ Cut Control (see figures D–E)

Cut Control‌ Cut Control enables the power tool to be guided precisely along a cutting line marked on the workpiece.

The viewing window (13) with the cut marks can either be attached to the base plate (11) using the base (15) or directly attached onto the glide shoe (10) without the base (15).

Securing Cut Control to the base plate (see figure D):

• Firmly insert the viewing window for Cut Control (13) into the brackets on the base (15). Then push the base together gently and allow it to click into place in the guide (21) on the base plate (11).
• To remove the base (15), push it together gently and remove it from the guide (21).

Securing Cut Control to the glide shoe (see figure E):

• Firmly insert the viewing window for Cut Control (13) into the brackets on the glide shoe (10).