Technical data
Thermo detector | AdvancedTemp |
---|---|
Article number | 3 603 F83 2.. |
Measuring range | |
| –30 °C to +500 °C |
| –5 °C to +50 °C |
| 10 to 90 % |
Measuring accuracy | |
Surface temperatureA)B) | |
| ±(1.5 + 0.1 × |t|) °CC) |
| ±2.5 °C |
| ±1.5 °C |
| ±0.015 × t °C |
Ambient temperature | ±1 °C |
Relative humidityB) | |
| ±3 % |
| ±2 % |
| ±3 % |
Optics (measuring distance:measured surface ratio)D)E) | 12:1 |
Operating temperature | –5 °C to +50 °C |
Storage temperature | –20 °C to +70 °C |
Max. altitude | 2000 m |
Relative air humidity max. | 90 % |
Pollution degree according to IEC 61010-1 | 2F) |
Laser class | 2 |
Laser type (typical) | 650 nm, < 1 mW |
Laser point divergence | ≤ 1.5 mrad |
Batteries | 2 × 1.5 V LR6 (AA) |
Approx. operating time | 8 h |
Weight according to EPTA-Procedure 01:2014 | 0.28 kg |
Dimensions (length × width × height) | 124 × 53 × 180 mm |
- A)
At a measuring distance of 0.75–1.25 m from the surface
- B)
At an ambient temperature of 21–25 °C
- C)
At a measuring distance of 0.1–0.3 m from the surface
- D)
Values in accordance with the Association of German Engineers' VDI/VDE 3511 part 4.3 standard (publication date July 2005); applies for 90 % of the measuring signal.
In all areas beyond the values detailed in the technical data, deviations are possible in measurement readings.
- E)
Refers to infrared measurement, see figure:
- F)
Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.
The serial number (7) on the type plate is used to clearly identify your measuring tool.