Maintenance and Cleaning

Keep the measuring tool clean at all times.

Never immerse the measuring tool in water or other liquids.

Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.

Cleaning the Gel Pad

Clean the gel pad (16) whenever it has become contaminated with dust or other particles, or if its adhesive strength has been reduced.

Only wash the gel pad when it has been detached from the tool.

Rinse the gel pad (16) with water. Wash it as necessary using a common household neutral soap or a detergent. Do not use any cleaning agents that contain alcohol or solvents.

Leave the gel pad, holder and protective cap to dry completely. The gel pad must not be warmed up (e.g. through warm air or heating).

If the adhesive strength is still not sufficient even after the gel pad (16) has been cleaned, it should be replaced.