Working Advice
- Switch the power tool off immediately if the saw blade becomes blocked.
- Always use a sturdy support when working on small or thin workpieces.
- Do not carry the power tool on your wrist. The suspension strap is intended for storage only (see figure B).
- Make sure you always cut from front to back (see figure C) or from top to bottom (see figure D) when sawing.
To increase the cutting speed, saw in a gentle rocking motion (in the cutting direction).
Switch the power tool off immediately if the saw blade jams. Widen the sawing gap slightly with a suitable tool and pull the power tool out.
Put the cover (12) on the saw blade (1) after finishing work in order to protect it.