Technical data
Digital laser measure | EasyDistance | ||
|---|---|---|---|
20 | 25 | 30 | |
Article number | 3 603 F72 A.. | 3 603 F72 B.. | 3 603 F72 C.. |
Distance measurement | |||
Measuring rangeA) | 0.14− | 0.14− | 0.14− |
Measuring accuracyB) | ±3.0 mm | ||
General | |||
Operating temperature | –10 °C to +40 °C | ||
Storage temperature | –20 °C to +70 °C | ||
Relative air humidity max. | 90 % | ||
Max. altitude | 2000 m | ||
Pollution degree according to IEC 61010-1C) | 2 | ||
Laser class | 2 | ||
Laser type | 635 nm, < 1 mW | ||
Divergence of the laser beam | < 1.5 mrad (full angle) | ||
Automatic switch-off after approx. | |||
| 5 min | ||
| 10 min | ||
Weight according to EPTA-Procedure 01:2014 | 0.07 kg | ||
Dimensions (L x W x H) | 94 × 36 × 23 mm | ||
Batteries | 2 x 1.5 V LR03 (AAA) | ||
Battery lifeD) | > 5 h | ||
Area calculation | No | Yes | Yes |
- A)
When measuring from rear edge. In unfavourable conditions such as very strong lighting, a temperature greatly deviating from 20 °C or a poorly reflecting surface, the measuring range can be restricted.
- B)
This applies for high reflectivity of the target (e.g. a wall painted white), weak background lighting and a 20 °C operating temperature; a deviation of ±0.05 mm/m must additionally be factored in. In unfavourable conditions such as strong lighting, great heights or a poorly reflecting surface, and at a temperature of 20 °C, the deviation can be ±5 mm; a deviation of ±0.15 mm/m must additionally be factored in.
- C)
Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.
- D)
At an operating temperature of 20 °C
The serial number (6) on the type plate is used to clearly identify your measuring tool.