Starting Operation
- Remove the battery from the power tool before carrying out work on the power tool (e.g. maintenance, changing tool, etc.). The battery should also be removed for transport and storage. There is risk of injury from unintentionally pressing the on/off switch.
- Make sure that the base unit cannot draw in dust or other contamination during operation.
- Make sure never to spray on the base unit.
- Stop spraying if fluid escapes from places other than the intended nozzle during spraying, and restore the spray gun to its proper condition. There is a risk of electric shock.
- Do not direct the fine-spray system against yourself, other persons or animals.
Switching on (see figure D)
- Insert the rechargeable battery.
- Grasp the spray gun by the handle and point it at the target area.
- Slide the on/off switch (20) forwards.
- Pull the trigger switch (6) on the spray gun.
Note: Air always flows out at the air cap (2) when the base unit is switched on.
Switching Off
- Let go of the trigger switch (6) and slide the on/off switch (20) backwards.
- Remove the rechargeable battery.