Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
|
(1) |
Base plate |
(2) | Quick-clamping lever |
(3) | Quick-action clamp |
(4) | Drill column |
(5) | Rack |
(6) | Speed diagram |
(7) | Clamping lever for height adjustment |
(8) | Clamping lever for depth stop |
(9) | Depth stop |
(10) | Laser warning label |
(11) | Hand wheel |
(12) | Drive unit |
(13) | On/off switch with quick stop function |
(14) | Display |
(15) | Speed regulator |
(16) | Keyless chuck |
(17) | Application toolA) |
(18) | Mounting holes |
(19) | Parallel guide |
(20) | Wing bolts of the parallel guide |
(21) | Gear selector switch |
(22) | Lighting and laser unit |
(23) | Hex key (4 mm) |
(24) | Fastening screw for the drill column |
(25) | Guide pin for the drill column |
(26) | Guide groove for the base plate |
(27) | Securing ring |
(28) | Retaining ring |
(29) | Clamping sleeve |
(30) | Light button |
(31) | Laser cross button |
(32) | Laser beam output |
(33) | Button for speed indicator/drill depth indicator |
(34) | Zero point button |
(35) | Set screw for adjusting the clamping force of the brake |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.