Changing the Paint Nozzle (PFS 2000) (see figure C)

Note: Check the spray material by stirring it before selecting the paint nozzle. Thin-viscosity material (e.g. wood paint) or diluted material can be sprayed better with the grey paint nozzle (9). Thick-viscosity material (e.g. wood lacquer or wall paint) can be sprayed better with the white paint nozzle (10).

• To change the paint nozzle, unscrew the cap nut (3).
• Pull off the air cap (2) and the gasket (12).
• Unscrew the mounted paint nozzle.
  When doing so, ensure that the O-ring (11) remains on the paint nozzle.
• Screwdrive the required paint nozzle into the thread in the spray gun.
• Put the air cap (2) with the spacer (12) on the paint nozzle and tighten it with the cap nut (3).