Connecting the air hose (see figures A1–A3)
- Open the holding clamp (24) and unwind the air hose (20) completely from the base unit (22).
Connecting the base unit:
- Insert a bayonet lock (21) of the air hose securely into the holes in the base unit port (26) according to the arrow marks.
- Turn the bayonet lock a quarter turn clockwise.
Connecting to the spray gun:
- Insert the second bayonet lock (21) of the air hose securely into the holes in the spray gun port (9) according to the arrow marks.
- Turn the bayonet lock a quarter turn clockwise.
Note: Remove the air hose (20) before pouring in spray material (quarter turn of the bayonet lock (21) anticlockwise; pull the bayonet lock (21) out of the port (9)).