Changing the nozzle cap (see figures B1–B2)
The fine-spray system is supplied with three nozzle caps:
Nozzle cap | |||
|---|---|---|---|
(10) | (11) | (12) | |
Paint | White | Grey | Black |
Delivery condition | Mounted | In the accessory compartment (27) under the holding clamp (24) | |
Application | "Wall" | "Wood/varnish" | "Wood/lacquer" |
Note: Check the spray material by stirring it before selecting the nozzle cap. Thinner-viscosity material (e.g. wood paint) can be sprayed better with the grey nozzle cap (11) or the black nozzle cap (12), whereas thicker-viscosity material (e.g. wall paint) can be sprayed better with the white nozzle cap (10).
- To change the nozzle cap, unscrew the cap nut (3).
- Pull off the air cap (2).
- Unscrew the mounted nozzle cap.
- Open the holding clamp (24) and take the required nozzle cap out of the accessory compartment (27).
- Screw the required nozzle cap into the thread in the spray gun.
- Put the air cap (2) on the nozzle cap and tighten it with the cap nut (3).