Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Lock-off function for on/off switch |
(2) | On/off switch |
(3) | Auxiliary handle (insulated gripping surface) |
(4) | Spindle lock button |
(5) | Scale for mitre/bevel angles |
(6) | Hex key |
(7) | Wing bolt for mitre/bevel angle preselection |
(8) | Wing bolt for parallel guide |
(9) | Viewing window for "CutControl" cutting line |
(10) | Parallel guide |
(11) | Retracting blade guard |
(12) | Base plate |
(13) | Adjusting lever for retracting blade guard |
(14) | Wing bolt for mitre/bevel angle preselection |
(15) | Protective guard |
(16) | Chip ejector |
(17) | Handle (insulated gripping surface) |
(18) | Clamping bolt with washer |
(19) | Clamping flange |
(20) | Circular saw bladeA) |
(21) | Mounting flange |
(22) | Saw spindle |
(23) | Extraction hoseA) |
(24) | Deflection tube for chips |
(25) | Dust/chip boxA) |
(26) | Slider for dust/chip box |
(27) | Clamping lever for cutting depth preselection |
(28) | Cutting depth scale |
(29) | 45° cut mark |
(30) | 0° cut mark |
(31) | Guide railA) |
(32) | Button for guide rail locking mechanism |
(33) | Screw clampA) |
- A)
Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.