Technical Data
Hand-held circular saw | PKS 55 | PKS 55 A | PKS 66 A | |
---|---|---|---|---|
Article number | 3 603 E00 0.. | 3 603 E01 0.. | 3 603 E02 0.. | |
Rated power input | W | 1200 | 1200 | 1600 |
No-load speed | min-1 | 5600 | 5600 | 5000 |
Max. cutting depth
|
mm |
55 |
55 |
66 |
Spindle lock | ● | ● | ● | |
CutControl | – | ● | ● | |
Dust/chip box | – | ● | ● | |
Base plate dimensions | mm | 288 x 153 | 288 x 153 | 327 x 160 |
Max. saw blade diameter | mm | 160 | 160 | 190 |
Min. saw blade diameter | mm | 150 | 150 | 184 |
Max. base blade thickness | mm | 1.8 | 1.8 | 1.8 |
Locating bore | mm | 20 | 20 | 30 |
WeightB) | kg | 3.9 | 3.9 | 5.4 |
Protection class | / II | / II | / II |
- A)
PKS 66 AF/PKS 66-2 AF with guide rail
- B)
Weight without mains connection cable and without mains plug
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Turn-on transients cause brief drops in voltage. Other tools may be adversely affected by these if the conditions in the electricity supply are unfavourable. Malfunctions are not expected if the impedances in the electricity supply are below 0.36 ohms.
Notes on mains connection requirements PKS 66 A/PKS 66 AF/PKS 66-2 AF:
The appliance meets IEC 61000-3-11 requirements and is subject to conditional connection. The appliance can lead to occasional voltage fluctuations under unfavorable power conditions. The impedance of this appliance is set as Zactual = 0.34 Ω. The user must make sure, that the connection point, with the impedance Zmax, on which the appliance shall be plugged in meets the impedance requirement: Zactual ≥ Zmax. If Zmax is unknown, determine Zmax in consultation with the network supplier or supply authority.