Adding/Subtracting Values

  1. Select the length measurement function.
  2. Take the first measurement.
  3. Press the  button.
  4. Take the second measurement.
  5. As soon as the second measurement has been completed, the result of the second measurement is displayed in the measured value lines (c) and the end result in the result line (d).

  1. Select the area measurement or volume measurement function.
  2. Take the first area measurement or volume measurement.
  3. Press the  button.
  4. Take the second area measurement or volume measurement.
  5. As soon as the second area measurement or volume measurement is completed, the result of the individual area measurements or volume measurements is displayed in the measured value lines.
  6. Press the  button to show the end result.
  7. The end result is displayed in the result line (d).

  1. Press the  button to subtract values. The subsequent steps are the same as for the section on "adding values".