Technical data

Digital laser measure

PLR 50 C

Article number

‎3 603 F72 2..‎

Distance measurement

Measuring rangeA)

0.05–50 m

Measuring accuracyB)

±2.0 mm

General

Operating temperatureC)

–10 °C to +50 °C

Storage temperature

–20 °C to +70 °C

Relative air humidity max.

90 %

Max. altitude

2000 m

Pollution degree according to IEC 61010-1

2D)

Laser class

2

Laser type

635 nm, < 1 mW

Divergence of the laser beam

< 1.5 mrad (full angle)

Automatic switch-off after approx.

  • Laser

20 s

  • Measuring tool (without measurement)E)

5 min

  • Bluetooth® (when inactive)

3 min

Batteries

3 × 1.5 V LR03 (AAA)

Weight according to EPTA-Procedure 01:2014

0.13 kg

Dimensions

115 × 50 × 23 mm

Battery life approx.

  • Individual measurementE)F)

10,000

  • Continuous measurementE)F)

2.5 h

Grade measurement

Measuring range

0°–360° (4 × 90°)

Measuring accuracyF)G)

±0.2°

Smallest display unit

0.1°

Data transmission

Bluetooth®

Bluetooth® 4.2
(Low Energy)H)

Operating frequency range

2402–2480 MHz

Max. transmission power

2.5 mW

A)

When measuring from front edge. In unfavourable conditions such as very strong lighting, a temperature greatly deviating from 25 °C or a poorly reflecting surface, the measuring range can be restricted.

B)

In unfavourable conditions such as strong lighting, high altitudes or a poorly reflecting surface, the maximum deviation can be ±4 mm with a deviation of ±0.15 mm/m. In favourable conditions, a deviation of ±0.05 mm/m needs to be taken into account.

C)

In continuous measurement mode, the max. operating temperature is +40 °C.

D)

Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.

E)

Bluetooth® deactivated

F)

At an operating temperature of 25 °C

G)

After user calibration at 0° and 90°; An additional grade error of ±0.01°/degree to 45° (max.) has to be taken into account. The left-hand side of the measuring tool serves as the reference level for grade measurement.

H)

When using Bluetooth® Low Energy devices, it may not be possible to establish a connection depending on the model and operating system. Bluetooth® tools must support the GATT profile.

The serial number (6) on the type plate is used to clearly identify your measuring tool.