Safety Instructions for Brushes

• Do not immerse the power tool in water. Water entering a power tool increases the risk of electric shock.

• Do not use accessories which have not been specifically designed and recommended for this power tool by the manufacturer. The mere fact that the accessory can be attached to your power tool does not guarantee safe operation.

• The permitted speed of the application tool must be at least equal to the maximum speed marked on the power tool. If accessories run faster than their rated speed, they may break and fly off.

• Always wait until the power tool has come to a complete stop before placing it down.

Protect the power tool against heat, e.g. against continuous intense sunlight, fire, water, and moisture. There is a risk of explosion.

• Do not use chemicals, undiluted acids, bleaches, cleaning agents containing chlorine etc. when cleaning. This could damage the surfaces being cleaned. First, test for tolerance on an inconspicuous area.

• Read all instructions on cleaning agents before using them on hot surfaces. Contact with hot surfaces can cause cleaning agents to ignite or produce harmful vapours.