Product features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Battery release button |
(2) | Battery |
(3) | Lock-off button for on/off switch |
(4) | On/off switch |
(5) | Hex key |
(6) | Spindle lock button |
(7) | Base plate |
(8) | Fastening screw for parallel guide |
(9) | Scale for mitre/bevel angles |
(10) | Wing bolt for mitre/bevel angle preselection |
(11) | Cut mark 45° |
(12) | Cut mark 0° |
(13) | Protective guard |
(14) | Auxiliary handle (insulated gripping surface) |
(15) | Handle (insulated gripping surface) |
(16) | Battery charge indicator |
(17) | Temperature monitoring/overload protection indicator |
(18) | Wing bolt for preselecting the cutting depth |
(19) | Cutting depth scale |
(20) | Retracting blade guard |
(21) | Saw spindle |
(22) | Adjusting lever for retracting blade guard |
(23) | Mounting flange |
(24) | Circular saw blade |
(25) | Clamping flange |
(26) | Clamping bolt |
(27) | "PowerLight" |
(28) | Reference mark for mitre/bevel angle setting |
(29) | Fastening screw for dust extraction adapter |
(30) | Dust extraction adapter |
(31) | Dust extraction hoseA) |
(32) | Reference mark for cutting depth setting |
(33) | Parallel guide |
- A)
This accessory is not part of the standard scope of delivery.