Operating modes
- Adapt the cutting depth to the thickness of the workpiece. A space of less than the height of one full tooth should be visible under the workpiece.
Loosen the wing bolt (18). For a smaller cutting depth, pull the power tool away from the base plate (7); for a larger cutting depth, push the power tool towards the base plate (7). Set the required cutting depth on the scale (19). Retighten the wing bolt (18).
When setting the cutting depth, use the reference mark (32) to the side of the cutting depth scale (19).
We recommend that you place the power tool down on the front side of the protective guard (13).
Loosen the wing bolts (10). Swivel the saw to the side. Set the required mitre/bevel angle on the scale (9). Retighten the wing bolts (10).
When setting the mitre/bevel angle, use the reference mark (28) (upper edge of the holder).
Note: When making mitre cuts, the cutting depth is less than the value shown on the cutting depth scale (19).