Technical Data
Angle grinder | AdvancedGrind 18V-80 | UniversalGrind 18V-75 | UniversalGrind 18V-75 | |
|---|---|---|---|---|
Article number | 3 603 CE5 100 | 3 603 CE5 000 | 3 603 CE5 001 | |
Rated voltage | V= | 18 | 18 | 18 |
Rated no-load speedA)B) | min-1 | 12000 | 12000 | 12000 |
Speed adjustment range | min-1 | 2800–12,000 | – | – |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 125 | 115 | 125 |
Grinding spindle thread | M 14 | M 14 | M 14 | |
Max. thread length of grinding spindle | mm | 21.7 | 21.7 | 21.7 |
Constant electronic control | ● | ● | ● | |
Speed preselection | ● | – | – | |
Soft start | ● | ● | ● | |
Restart protection | ● | ● | ● | |
Overload protection | ● | ● | ● | |
Weight according to EPTA-Procedure 01:2014C) | kg | 2.4 (6.0 Ah) | 2.3 (6.0 Ah) | 2.4 (6.0 Ah) |
Recommended ambient temperature during charging | °C | 0 to +35 | 0 to +35 | 0 to +35 |
Permitted ambient temperature during operationD) and during storage | °C | –5 to +50 | –5 to +50 | –5 to +50 |
Compatible rechargeable batteries | PBA 18V...W-. | PBA 18V...W-. | PBA 18V...W-. | |
Recommended rechargeable batteries for maximum performance | PBA 18V...W-. | PBA 18V...W-. | PBA 18V...W-. | |
Recommended battery chargersE) | AL 18... | AL 18... | AL 18... |
- A)
Measured at 20–25 °C with rechargeable battery PBA 18V 6.0Ah.
- B)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed is lower for safety reasons and according to production tolerances.
- C)
Depends on rechargeable battery, protective guard, and auxiliary handle in use
- D)
Limited performance at temperatures < 0 °C
- E)
The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV