Make sure that you are able to press the On/Off switch without releasing the handle.
To switch on the power tool, tilt the on/off switch (2) toward the right to the “I” position.
To switch off the power tool, tilt the on/off switch (2) toward the left to the “O” position.
In normal conditions of use, the power tool cannot be overloaded. If the power tool is overloaded or the permitted battery temperature is exceeded, the electronics of the power tool will switch off until the temperature returns to within the optimum operating temperature range.
You can even preselect the orbital stroke rate during operation using the necessary orbital stroke rate preselection thumbwheel (1).
The required orbital stroke rate is dependent on the material and the work conditions and can be determined using practical tests.