Saavutettavuus
Bosch Global
Työkalut kotiin & puutarhaan
Etsi jälleenmyyjä
Etsi jälleenmyyjä
Etsi jälleenmyyjä
  1. Etusivu
  2. All about GARDENING & DIY
  3. Create a homemade Easter bunny toy for your little ones

Create a homemade Easter bunny toy for your little ones

Leisure time and family time
Project
A picture of a wooden toy bunny on wheels in a kids bedroom
  • Difficulty
    medium
  • Cost
    58-117 €
  • Duration
    1-3 h

Create a homemade wooden toy for your little ones this Easter, the perfect special present. Just follow our simple step-by-step guide.

You need
Step14

Getting started

A picture of all the tools needed for the bunny project
A picture of someone copying out the bunny template

Here's everything you need

Copy out the bunny template onto the wood

You need: pencil, glued wood panel, bunny template

Start by cutting out the printed bunny template. Then mark the outline of the bunny on the glued wood panel using a pencil.

Bunny template

Step24

Start cutting out the bunny

A picture of someone cutting out the bunny using a cordless jigsaw from Bosch

Cut the bunny out using a cordless jigsaw

You need:
Jigsaws
, g-clamps

Next fix the wood panel to the workbench using screw clamps and then use a cordless jigsaw and a curve-cutting saw blade to cleanly cut out the bunny. Then cut the rod to a desired length, we cut ours too 14cm.

A tip for those who also want to cut out the wheels themselves: Simply cut the wheels out of the scrap wood using a holesaw accessory (6 cm diameter) and then sand them thoroughly.

Step34

Get a smooth finish

A picture of someone sanding down the wooden bunny with a multi-sander

Use a multi-sander for a smooth finish

You need:
Multi-sander

Now to sand down the cut out bunny with a multi-sander to achieve to a smooth finish.

Step44

Fitting the wheels

A picture of someone attaching the wooden wheels to the wooden bunny

Just add the wheels

You need: wooden wheels, eyebolt with wood thread, cord

Nearly there! Drill holes into the feet and wheels using a 8mm drill bit and then slide the rods through both holes. Next attach the wooden wheels onto the rods and screw an eyebolt with a wooden thread into the front axle. Then lastly attach a cord to the bunny as a leash and you're done.

Tags