Symbols

The sticker regarding operation of the fine-spray system is located on the base station. The correct interpretation of the symbols helps you operate the fine-spray system better and more safely.

Symbols and their meanings

Detailed description

The fine-spray system is suitable for varnishes and lacquers and for wall paints.

"Wood/varnish" application:
Spraying varnishes and primers

"Wood/lacquer" application:
Spraying solvent-based and water-dilutable lacquers, clear lacquers and oils

"Wall" application:
Spraying emulsion and latex paints

see Intended Use

Step 1:
Choose the correct nozzle cap

Choose the grey nozzle cap (11) for the "wood/varnish" application

Choose the black nozzle cap (12) for the "wood/lacquer" application

Choose the white nozzle cap (10) for the "wall" application

see Changing the nozzle cap (see figures B1–B2)

Step 2:
Setting the spray material quantity

Select setting 1, 2 or 3 on the thumbwheel (4) for the "wood/varnish" application

Select setting 1, 2 or 3 on the thumbwheel (4) for the "wood/varnish" application

Select setting 4 or 5 on the thumbwheel (4) for the "wall" application

see Setting the spray material quantity (see figure J)

Step 3:
Setting the air flow

Set the "wood/varnish" application at the air flow control (25)

Set the "wood/varnish" application at the air flow control (25)

Set the "wall" application at the air flow control (25)

see Setting the air flow (see figure D)