Sawing plastic: How to do it with a jigsaw
Introduction
Everyone knows that you can cut through wood with a jigsaw. But did you know that you can also saw some plastics with it? These include acrylic glass, plastic sheet or PVC pipes: Your jigsaw can easily handle this with the right saw blade. We explain how to do this and what you'll need to consider.
Let's go - step by step
Sawing plastic – what you'll need to consider
Sawing plastic – what you'll need to consider
Protective clothing and battery removal
It's always important to wear the correct protective clothing when you're doing DIY, and this applies to sawing plastic. Always wear eye and ear protection and protective gloves.
Before you prepare the jigsaw, check our jigsaw blade overview to make sure you're using the right blade. Before you use it, be sure to remove the battery.
Inserting the saw blade
It is important to use a special saw blade when sawing plastic. Bosch saw blades for plastic can be identified by their red shank. You will find more detailed information in the saw blade overview. Insert the blade into the jigsaw. Find out how to change saw blades in our guide.
Deactivating pendulum action
You do not need a saw blade pendulum action for cutting plastic. Plastics vary greatly in terms of hardness and porosity. The additional movement of the pendulum action increases the risk of the cut edge fraying or even tearing. Before sawing, turn the pendulum action switch on the jigsaw to 0 to deactivate this function.
Securing a plastic strip
When sawing plastic parts – for example strips – the workpiece must also be clamped securely. Be careful not to scratch the plastic. If you don't have a special workbench with a clamping option like in our example, you can place a piece of terry cloth or wood between the workpiece and ordinary G-clamps. This protects the material.
Saws
As soon as you have reinserted the battery, you can start sawing. Place the jigsaw on the workpiece and start it. Important: Never saw too fast, set only a medium stroke rate and apply minimal pressure. The throttle switch should never be fully depressed. Sawing too quickly will cause the plastic to melt. Afterwards, it is worth grinding the saw edge again.
Would you like to know more about correctly using Bosch jigsaws? No problem! In our guides, we explain the most important basics , such as how to make a straight cut or perform round sawing. We also give you important tips on processes such as sawing without fraying , sawing metal or sawing out a worktop .
Plastics are wonderfully versatile materials that let you create eye-catching projects. For example, this indoor bike rack you can build yourself with a perspex display case and transparent hooks for your bike.